Sharp FO-2950M - B/W Laser - All-in-One, Service Manual

Page: 69 / 232

UX-4000MU
FO-2950MU/C
Note
Fusing section:
•
When fixing the cable of the temperature fuse and the thermistor, put it
neat inside the projection of the frame.
If not, paper jams may be resulted.
Optical section
•
Do not touch the mirror fixing screw in the optical section. If touched,
the mirror bracket may be change, causing a shift in the print image
position or vague images. The mirror angle cannot be adjusted in the
market.
•
Do not touch the volume attached. If touched, normal images cannot
be produced. This adjustment cannot be made in the market.
Note for assembly
•
When attaching DV bias electrode, adjust so that the contact is over
the DC-BIAS electrode of the PWB unit.
Terminal
5
Remove two screws.
6
Pull DV bias electrode toward you, and remove it from the lower
frame.
DV bias electrode
5
6
3 – 26
33. Wire treatment
Fig. 50
Fig. 51
Fig. 52
Fig. 53
Panel Unit
Panel cable
Motor cable
CIS cable
Fig. 54