Sharp el-9950 Manual Download Page 49

Page: 49 / 266

Chapter 2: Operating the Graphing Calculator

• The message on the right may

occasionally appear. In this
case, repeat the procedure
from step 1 to prevent loss of
data.

2. Selecting the RESET within the OPTION menu

1. Press

, then

The OPTION menu appears.

2. While in the OPTION menu,

press

to select

RESET; the RESET sub-
menu items should appear on
the right side of the screen.

3. The first item

1 default set will initialize only the SETUP and

FORMAT settings, while the second item

2 All memory will

erase all memory contents and settings. To reset the memory,
select

2 All memory by pressing

. The verification

window will appear.

4. Press the

key to

clear all data stored on the
calculator.
Press any key to continue.

Summary of Contents for el-9950











































































































































































































































































Search results

Summary of Contents for el-9950

Reviews:

Brands by name

Popular brands

Sharp el-9950, Manual

Search results

Summary of Contents for el-9950

Reviews:

Brands by name

Popular brands