Sharp DX-C200P Operation Hardware Manual Download Page 100

Page: 100 / 168

Using both hands, hold the center of the top cover and close the cover carefully. Be
careful not to trap your fingers.

CER012

Wait while the toner loads.
To avoid malfunction, do not turn off the power while "Replace Toner:" appears on the display.

Put the cover that you removed in step 5 on the old print cartridge. Then, put the old print
cartridge into the bag, and then put it into the box.

CER055

• Make sure to cover the old print cartridge with the protective cover for recycling and environmental

purposes.

• Comply with the print cartridge Recycling Program, whereby used print cartridges are collected for

processing. For details, ask your sales or service representative.

6. Replacing Consumables

Summary of Contents for DX-C200P Operation









































































































































































Search results

Summary of Contents for DX-C200P Operation

Reviews:

Related manuals for DX-C200P Operation

Brands by name

Popular brands

Sharp DX-C200P Operation, Hardware Manual

Search results

Summary of Contents for DX-C200P Operation

Reviews:

Related manuals for DX-C200P Operation

Brands by name

Popular brands