Sharp DX-C200P Operation Hardware Manual Download Page 31

Page: 31 / 168

• If this machine is not going to be used for several days or longer at a time, disconnect its power

cord from the wall outlet.

• When performing maintenance on the machine, always disconnect the power cord from the

wall outlet.

• Make sure the power cable is plugged securely into the wall outlet.
• Turn the power switch off when plugging and unplugging the power plug.
• Do not turn off the power switch until initializing is completed. Doing so results in malfunction.

Plug in the power cable.

CER065

Insert the plug of the power cord into the wall socket securely.

Turn the power switch to On.

CER066

The Power indicator on the control panel lights up.

• Wait until the Power indicator turns on.

Installing the Printer

Summary of Contents for DX-C200P Operation









































































































































































Search results

Summary of Contents for DX-C200P Operation

Reviews:

Related manuals for DX-C200P Operation

Brands by name

Popular brands

Sharp DX-C200P Operation, Hardware Manual

Search results

Summary of Contents for DX-C200P Operation

Reviews:

Related manuals for DX-C200P Operation

Brands by name

Popular brands