Sharp DX-C200P Operation Hardware Manual Download Page 40

Page: 40 / 168

USB Connection

• For users outside the United States of America: properly shielded and grounded cables and

connectors must be used for connections to a host computer (and/or peripheral) in order to
meet emission limits.

• For users in the United States of America: properly shielded and grounded cables and

connectors must be used for connections to a host computer (and/or peripheral) in order to
meet FCC emission limits.

• USB2.0 interface cable is not supplied. Obtain it separately, according to the computer you are

using.

• USB connection is possible under Windows XP/Vista/7, Windows Server 2003/2003

R2/2008/2008 R2, and Mac OS X.

• USB connection with Macintosh is only possible via the computer's standard USB port.

Remove the cable cover.

CER080

3. Connecting the Printer

Summary of Contents for DX-C200P Operation









































































































































































Search results

Summary of Contents for DX-C200P Operation

Reviews:

Related manuals for DX-C200P Operation

Brands by name

Popular brands

Sharp DX-C200P Operation, Hardware Manual

Search results

Summary of Contents for DX-C200P Operation

Reviews:

Related manuals for DX-C200P Operation

Brands by name

Popular brands