46
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
References
- Error Messages -
Error Messages
Error messages
BLANK MD
Can’t COPY
Can’t EDIT
Can’t READ
(
:Number or
symbol)
Can’t REC
Can’t WRITE
DISC FULL
Er-CD 20
Er-MD
(
:Number or
symbol)
EDIT OVER
MD NO DISC
CD NO DISC
Remedy
●
Replace it with another disc.
●
Replace the CD.
●
Change the stop position of the
track and then try editing it.
●
Replace it with another disc.
●
Erase the disc and try record-
ing again.
●
Re-record or replace the
MiniDisc.
●
Set this unit to the stand-by
mode and try to write the
TOC again. (Remove any
source of shock or vibration
whilst writing.)
●
Replace the disc with another
recordable disc.
●
Set this unit to the stand-by
mode and turn the power on
again.
●
Set this unit to the stand-by
mode and turn the power on
again.
●
Decrease the number of
tracks.
●
Replace it with a disc that has
enough time to record.
●
Load a MiniDisc.
●
Reload the MiniDisc.
●
Load a CD.
●
Reload the CD.
Meaning
●
Nothing is recorded.
(Neither music nor disc name
is recorded.)
●
You tried to record from a
copy prohibited CD.
●
A track cannot be edited.
●
The disc is damaged.
●
TOC information cannot be
read.
●
MiniDisc not specified.
●
Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.
●
The TOC information could
not be created properly due
to a mechanical shock or to
scratches on the disc.
●
The disc is out of recording
space.
●
The CD cover is not working
properly.
●
MiniDisc is not working prop-
erly.
●
You chose 21 or more tracks
for track editing.
●
The remaining time available
for recording is short.
●
A MiniDisc has not been
loaded.
●
The MiniDisc data cannot be
read.
●
A CD has not been loaded.
●
The CD data cannot be read.
When an error message is displayed, proceed as follows:
Meaning
●
The number of characters for
the disc name or track name
exceeds 40.
●
The data recorded on this
disc is not audio data.
●
You tried to record on a play-
back-only disc.
●
The disc is write protected.
●
The temperature is too high.
●
TOC information recorded on
the MD does not match the
MiniDisc specifications or it
cannot be read.
●
There is no space left for re-
cording track numbers.
●
There is no space left for re-
cording character informa-
tion.
●
The data contains an error.
●
MiniDisc not specified.
●
MiniDisc is not working prop-
erly.
●
Tuner is not working properly.
Error messages
NAME FULL
NOT AUDIO
PLAYBACK MD
PROTECTED
TEMP OVER
TOC FORM
(
:Number or
symbol)
TOC FULL
TOC FULL1
? MD DISC
POWER?
ER-TU
(
:Number or
symbol)
Remedy
●
Shorten the disc or track
name.
●
Select another track.
●
Replace the disc.
●
Replace it with another re-
cordable disc.
●
Move the write protection tab
back to its original position.
●
Set this unit to the stand-by
mode and wait for a whilst.
●
Replace it with another disc.
●
Erase the disc and try record-
ing again.
●
Replace it with another re-
cordable disc.
●
Replace it with another re-
cordable disc.
●
Erase the needless charac-
ters.
●
Replace it with another disc.
●
Set this unit to the stand-by
mode and turn the power on
again.
●
Set the unit to the stand-by
mode and turn the power on
again.
*MD9000H-E44-48
2001.4.20, 2:16 AM
46
