42
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
- T
imer and Sleep Operation -
Timer and Sleep Operation (continued)
Notes:
I
The timer cannot control the component connected to the auxiliary input sockets.
I
When the CD or MiniDisc is over, playback will stop before the stop time.
If you wish to play to the stop time, set repeat play for the CD or MiniDisc.
●
Timer playback and timer recording cannot be set at the same time.
To confirm the timer setting:
1. Whilst in the timer stand-by mode, press the TIMER button.
2. Within 10 seconds, press the
5
/
3
or
2
/
4
button to select “TIMER CALL”.
3. Press the MEMORY/ENTER button.
After the settings are displayed sequentially, your system will return to the timer stand-
by mode.
To cancel the timer operation:
Whilst in the timer stand-by mode, press the ON/STAND-BY button to turn the power
on. The timer operation will be cancelled.
You can also cancel the timer operation by the following steps without turning on the
power.
1. Press the TIMER button.
2. Within 10 seconds, press the
5
/
3
or
2
/
4
button to select “CANCEL”.
3. Press the MEMORY/ENTER button.
Caution:
In the following cases, the timer recording function will not work.
●
When a MiniDisc has not been inserted.
●
When the MiniDisc is for playback only or protected against accidental erasure.
●
When there is no recording space left on the MiniDisc ("TOC FULL " or "DISC
FULL" appears).
■
Sleep operation
The radio, CD and MiniDisc can all be turned off automatically.
1
Play the desired sound source.
2
Press the SLEEP button.
3
Within 10 seconds, press the MEMORY/ENTER button.
4
Press the
5
5
5
5
5
/
3
3
3
3
3
or
2
2
2
2
2
/
4
4
4
4
4
button to select the time.
(Maximum: 2 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during the sleep operation.
*MD9000H-E41-44
2001.4.20, 2:15 AM
42
