Sharp CP-E9000H Operation Manual Download

Page: 14 / 52

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Basic Operation

- Setting the Clock -

This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.

Press the CLOCK button and within 10 seconds, press the
MEMORY/ENTER button.

Press the

5/3

2/4

button to select 24-hour or 12-hour

display and then press the MEMORY/ENTER button.

“0:00”

→

The 24-hour display will appear.
(0:00 - 23:59)

“AM 0:00”

→

The 12-hour display will appear.
(AM 0:00 - PM 11:59)

“AM 12:00”

→

The 12-hour display will appear.
(AM 12:00 - PM 11:59)

Press the

5/3

2/4

button to adjust the hour and then

press the MEMORY/ENTER button.

●

When the 12-hour display is selected, “AM” will change automatically to
“PM”.

Press the

5/3

2/4

button to adjust the minutes and

then press the MEMORY/ENTER button.

●

The hour will not advance even if minutes advance from “59” to “00”.

●

The clock starts from “0” second. (Seconds are not displayed.)

To check the time when the power is on:

Press the CLOCK button.
The time display will appear for about 10 seconds.

Note:
The “0:00” or time will flash at the push of the CLOCK button when the AC power
supply is restored after a power failure or unplugging the unit.
Readjust the clock by performing “Setting the Clock” from the beginning.

Setting the Clock

*MD9000H-E12-14

2001.4.20, 2:05 AM

Summary of Contents for CP-E9000H





















































Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands

Sharp CP-E9000H, Operation Manual

Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands