Sharp CP-E9000H Page 44 Operation Manual Download

Page: 44 / 52

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Advanced Features

- Enhancing

our Stereo System -

Enhancing Your Stereo System

The connection cable is not included. Purchase a commercially available cable as
shown below.

Red

White

Red

RCA lead
(not supplied)

VCR, DVD, etc.

To the
line
output
sockets

White

Headphones

■

Listening to the playback sounds from the
connected device

. Use a connection cable to connect an external device to the AUX INPUT sockets.

When using video equipment, connect the audio output to this unit and the video
output to a television.

. Press the ON/STAND-BY button to turn the power on.

. Press the AUX button or the VIDEO/AUX button on the remote control.

. Start playback on the external device.

. Adjust the input level using the TUNING (

)

button.

. Adjust the volume using the VOLUME buttons.

■

Recording on a MiniDisc

. Use a connection cable to connect an external device to the AUX INPUT sockets.

. Press the ON/STAND-BY button to turn the power on.

. Press the AUX button.

. Load a recordable MiniDisc.

. Press the REC button.

. Start playback on the external device.

. Adjust the recording level using the TUNING (

)

button.

. Press the A-MARK button on the remote control to activate/deactivate the auto

mark function.

●

If you turn on the auto mark function, the unit pauses when a silence lasts for
1 second or more, and creates a track number.

. Press the MD

button.

To stop recording:

Press the MD

■

button.

■

Headphones

●

Before plugging in or unplugging the headphones, reduce the volume.

●

Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between
16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms.

●

Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.

*MD9000H-E41-44

2001.4.20, 2:15 AM

Summary of Contents for CP-E9000H





















































Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands

Sharp CP-E9000H, Operation Manual

Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands