Sharp CP-E9000H Operation Manual Download

Page: 39 / 52

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

MD Editing

- Editing a Recorded MiniDisc -

MD-E9000H

■

To move programmed tracks (programmed
move)

Programme tracks in the desired order (steps 1-5, page 19).

Press the NAME/TOC button, and within 10 seconds, select
“PRGM MOVE” using the

5/3

2/4

button.

Within 10 seconds, press the MEMORY/ENTER button.

●

To cancel the operation, press the NAME/TOC button or MD

■

button.

Press the MEMORY/ENTER button again.

●

The tracks will be moved, and the unit will exit the programmed move mode.

Notes:

●

The tracks that are not included in the programmed selections will be put at the end
of the new track numbers.

●

If a track has been programmed more than once, the initial programme position will
have priority.

Editing a Recorded MiniDisc (continued)

■

To move a track

Press the MD

■

button and load a MiniDisc (see page 17).

Whilst in the stop mode, select the track you want to move using
the

5/3

2/4

button. Or start playing the track and then

press the MD

button.

Press the NAME/TOC button, and within 10 seconds, select
“MOVE” using the

5/3

2/4

button.

Within 10 seconds, press the MEMORY/ENTER button.

Select a new track position using the

5/3

2/4

button.

●

To cancel the operation, press the MD

■

button.

Press the MEMORY/ENTER button again.

●

The track is moved, and the unit is stopped at the beginning of the moved
track.

Notes:

●

When a track has been moved, the other tracks will be newly numbered automati-
cally.

●

This function cannot be used in the random play mode.

*MD9000H-E36-40

2001.4.20, 2:14 AM

Summary of Contents for CP-E9000H





















































Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands

Sharp CP-E9000H, Operation Manual

Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands