Sharp CP-E9000H Page 12 Operation Manual Download

Page: 12 / 52

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Basic Operation

- General Control -

■

Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will
see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand-by mode (demonstration mode), press the DIS-
PLAY (DEMO) button. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the DISPLAY (DEMO) button
again.

■

To turn the power on

Press the ON/STAND-BY button.

To set the unit to stand-by mode:

Press the ON/STAND-BY button again.

■

To change the display brightness (2 levels)

You can switch the display brightness by pressing the DIMMER button on the remote
control.

■

Opening and closing the CD compartment

The CD compartment cover is motorised.

When the power is turned on, you can open or close the CD compartment by pressing
the CD

(OPEN/CLOSE) button.

Caution:

●

Do not open or close the CD compartment cover manually. It may cause mal-
functions to the unit.

●

Be careful not to jam your fingers in the CD compartment cover.

General Control

Dimmed

Brightened

*MD9000H-E12-14

2001.4.20, 2:05 AM

Summary of Contents for CP-E9000H





















































Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands

Sharp CP-E9000H, Operation Manual

Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands