Sharp CP-E9000H Page 41 Operation Manual Download

Page: 41 / 52

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Advanced Features

- T

imer and Sleep Operation -

MD-E9000H

Timer and Sleep Operation

■

Timer playback/Timer recording

●

Before setting the timer, press the CLOCK button to check that the clock is on
time.

Press the ON/STAND-BY button to turn the power on and press

the TIMER button.

Within 10 seconds, select “TIMER SET” with the

5/3

button.

Within 10 seconds, press the MEMORY/ENTER button.

Select timer playback or timer recording by using the

5/3

2/4

button, and then press the MEMORY/ENTER button.

Press the

5/3

2/4

button to specify the hour to start,

and then press the MEMORY/ENTER button.

Press the

5/3

2/4

button to specify the minutes to

start, and then press the MEMORY/ENTER button.

Press the

5/3

2/4

button to specify the hour to stop,

and then press the MEMORY/ENTER button.

Press the

5/3

2/4

button to specify the minutes to

stop, and then press the MEMORY/ENTER button.

Select the desired function by using the

5/3

2/4

but-

ton, and then press the MEMORY/ENTER button.

When you select the tuner, select a station by pressing the

5/3

2/4

button, and then press the MEMORY/ENTER button.

Adjust the volume using the

5/3

2/4

button.

Press the MEMORY/ENTER button.

●

Your system will enter the power stand-by mode and the TIMER indicator
will light.

When the start time is reached, playback or recording will start.
When the timer end time is reached, timer operation will stop.

*MD9000H-E41-44

2001.4.20, 2:15 AM

Summary of Contents for CP-E9000H





















































Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands

Sharp CP-E9000H, Operation Manual

Search results

Summary of Contents for CP-E9000H

Reviews:

Related manuals for CP-E9000H

Brands by name

Popular brands