Sharp AJ-1100 Online Manual Download Page 70

Page: 70 / 83

Troubleshooting

How to Use the

Online Manual

Print Status

Window

Maintenance

Troubleshooting

Sharing Printer

Windows 95/98/Me/NT4.0 Windows 2000/XP

Printer Driver Settings

Paper is not Fed into the Printer (part 2)

CHECK5

Is the loaded paper too thick or too thin?

Use only paper that meets SHARP specifications for
weight as shown below.

CHECK6

Is the printer on a flat surface?

The printer will not operate correctly when placed on
an uneven surface. Use the printer on a flat surface.

CHECK7

Is the paper curled or folded?

Using curled or old paper may cause paper supply
problems. The use of new paper is recommended.

CHECK8

Did you fan the paper before placing into
the paper tray?

Fan the paper, and tap the edge against a flat surface to
even the stack before loading into the printer.

CHECK9

Is the setting for printing cards or envelops
correct?

When printing onto a card or envelope, open the paper
tray so that it is nearly horizontal, and insert the card or
envelope so that it is in the portrait direction with the
side to be printed on facing up.

Reference:

See "LOADING PAPER" in the Setup Guide
and Operation Manual for details on
inserting cards and envelopes.

Type

Specifications

Paper

to 200

(16 lbs. to 110 lbs. index)

Banner

(20 lbs.)

Envelope

to 90

(20 lbs. to 24 lbs.)

Card

110

to 200

(110 lbs. index)

Max. thickness: 0.25mm (0.010")

When inserting envelopes into the
paper tray, press the thick side with
the folded flaps together. Otherwise
trouble with the paper feed may
occur.

Press on this side.

Summary of Contents for AJ-1100




















































































Search results

Summary of Contents for AJ-1100

Reviews:

Related manuals for AJ-1100

Brands by name

Popular brands

Sharp AJ-1100, Online Manual

Search results

Summary of Contents for AJ-1100

Reviews:

Related manuals for AJ-1100

Brands by name

Popular brands