Maintenance
58
How to Use the
Online Manual
Print Status
Window
Maintenance
Troubleshooting
Sharing Printer
Windows 95/98/Me/NT4.0 Windows 2000/XP
Printer Driver Settings
Changing the Print Head (part 1)
If print quality is poor after cleaning the print head 3 times, the print head may be worn.
Ensure the printer is turned on before following the steps below on how to change the print head.
1111
Open the front cover.
The carriage will automatically move to the centre position.
2222
Raise the print head latch.
Raise the latch until it comes to a complete halt.
Refer to the table on the right to check the life of each print head.
Part Number
Supply
AJ-H10B
Print head (Black)
AJ-H10C
Print head (Colour)
Print head life*
10,000 sheets
10,000 sheets
* When using 20.3cm x 25.4cm (8" x 10") size paper at 5% image area in normal usage.
Do not put your hands into the printer until the carriage
stops at the centre position. Doing so may hurt your
hands. Do not try to move the carriage manually by
force, you may damage the printer.
During print head replacement, if the front cover is left open
for more than 8 minutes with the print head latch closed, the
carriage will automatically return to its home position in order
to protect the print head. To return the carriage to the centre
position, close the front cover, and then open it again.
If the carriage does not move to the centre position
automatically when you open the front cover, close the
front cover, and then open it again.
Push firmly in the direction of the arrow to
unlock the print head.
1
Raise this latch.
2
Summary of Contents for AJ-1100
Page 1: ......
