Sharp AJ-1100 Online Manual Download Page 65

Page: 65 / 83

Maintenance

How to Use the

Online Manual

Print Status

Window

Maintenance

Troubleshooting

Sharing Printer

Windows 95/98/Me/NT4.0 Windows 2000/XP

Printer Driver Settings

Keeping the Printer Clean

Here are a few points and cautions on cleaning the printer. Take the time to read this page before cleaning.

1111

Turn off the power using the power button and
ensure that the power lamp is extinguished, then
unplug the power cord.

2222

Wipe the surface of the printer and the output tray.

Wipe with a soft clean cloth without any loose threads.

3333

Open the front cover.

4444

Check the inside of the printer. If you find stains of
splashed ink, paper dust or dirt, wipe them away
with a soft cloth.

If the dirt is sticky and hard to remove, wipe the dirt away
with a firmly squeezed wet cloth after soaking it in water.

When wiping the surface of the printer, keep the front
cover closed.

Do not use cleaning agents containing ammonia,
benzene, or thinner. Cleaning the printer with these
substances will distort, degenerate or discolour the
surfaces.

When wiping inside the printer, be careful not to hurt
yourself on projections inside it.

Never wipe the area around the print heads in the
printer. Doing so will damage the print heads.

Never wipe the
area around the
print heads.

Summary of Contents for AJ-1100




















































































Search results

Summary of Contents for AJ-1100

Reviews:

Related manuals for AJ-1100

Brands by name

Popular brands

Sharp AJ-1100, Online Manual

Search results

Summary of Contents for AJ-1100

Reviews:

Related manuals for AJ-1100

Brands by name

Popular brands