Sharp AJ-1100 Online Manual Download Page 63

Page: 63 / 83

Maintenance

How to Use the

Online Manual

Print Status

Window

Maintenance

Troubleshooting

Sharing Printer

Windows 95/98/Me/NT4.0 Windows 2000/XP

Printer Driver Settings

Aligning the Print Head (part 1)

Align the print head after installing or changing the print head, or if printed lines are not straight, or have blank
spaces. Follow the steps below to align the print head.

1111

Make sure that A4 sized paper is set in the tray.

2222

Click the "Utility" tab in the printer driver setup
screen, and then click "Maintenance" button.

3333

Click the "Start" button of "Print alignment
patterns".

4444

Click the "OK" button.

The "Align print head" dialog box will appear, and a test
chart will be printed.

5555

Check the test chart results, and change the
preferences to the best setting for each pattern.

1111

Select a pattern sample for "Pattern A".

Look at the chart A on your test chart. Select the number
under the pattern sample, which

is located closest to the

centre of the two vertical lines.

-8

-7

-6

-5

-4

-3

-2

-1

+1 +2 +3 +4 +5 +6 +7 +8

-8

Example:

Summary of Contents for AJ-1100




















































































Search results

Summary of Contents for AJ-1100

Reviews:

Related manuals for AJ-1100

Brands by name

Popular brands

Sharp AJ-1100, Online Manual

Search results

Summary of Contents for AJ-1100

Reviews:

Related manuals for AJ-1100

Brands by name

Popular brands