Sharp 703SH, User Manual

Page: 27 / 137

26 Voice Call/Video Call Functions
To Make a Conference Call
You must have one active call and one held call.
1.
During a call, press [Options] and select “Multi Party”.
2.
Select “Conference All” to join the conference call.
3.
Press
F
to end the conference call.
Note
• The conference call service may not be available on all networks.
Contact your network operator for more information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on hold, select
“Private”.
• To end the call with all participants, select “End Active Call(s)”
or “End Held Call(s)”.
• To reject adding more participants to the current party, press
[Options] and select “Reject”, or you can send the busy tone by
selecting “Busy”.
To Add New Participants to the Conference Call
1.
Press [Options] and select “Dial New Number”.
2.
Enter the number you wish to include in the conference call
and press
D
to dial.
3.
Press [Options] and select “Multi Party”.
4.
Select “Conference All” to join the conference call.
If you wish to add other participants, repeat steps 1 to 4.
To End the Call with a Conference Call Participant
1.
During a conference call, highlight the person that you wish to
disconnect from the conference call.
2.
Press [Options] and select “End Active Call(s)” or “End Held
Call(s)”.
To Have a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the participants,
you may select the participant from the conference list and put the
other participants on hold.
1.
During a conference call, select the person that you wish to
talk to.
2.
Press [Options] and select “Multi Party”.
3.
Select “Private”.
4.
Once you have finished the private conversation, press
[Options] and select “Multi Party”.
5.
Select “Conference All” to return to the conference call.
Muting the Microphone
1.
During a call, press [Options] and select “Mute Microphone”.
2.
Select “On”.
To unmute the microphone, select “Off”.