Sharp 703SH, User Manual

Page: 113 / 137

112 Connectivity
Network Settings
To Select a Network Automatically
Each time the power is turned on, your phone always tries to connect
to the preferred network.
If your phone is not connected to the network, you can perform the
following immediately to establish the preferred network connection.
“Connectivity”
→
“Network Settings”
→
“Select Network”
→
“Automatic”
To Set the Network Manually
“Connectivity”
→
“Network Settings”
→
“Select Network”
→
“Manual”
1.
Select the desired network.
To Add a New Network
“Connectivity”
→
“Network Settings”
→
“Select Network”
→
“Add New Network”
If there are no entries, press and go to step 2.
If there is an entry, press and perform the following steps.
1.
Select “Add”.
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
5.
Select “Select network type”.
6.
Select the desired network.
To Edit the Preferred List
“Connectivity”
→
“Network Settings”
→
“Select Network”
→
“Set Preferred”
1.
Select the name of the network you wish to edit.
2.
Select “Insert” to insert over the selected position, “Add to
end” to insert at the end or “Delete” to delete.
To Cut the Network Connection
“Connectivity”
→
“Network Settings”
→
“Flight Mode”
1.
Select “On” or “Off”.
To Show the Network Information
“Connectivity”
→
“Network Settings”
→
“Network
Information”
Information about the operator name, package and services are
displayed.
Flight Mode
When the Flight Mode is set to “On”, the handset cuts off the network
connections and stops searching for available networks to connect.
“Connectivity”
→
“Flight Mode”
1.
Select “On” or “Off”.
(M 10-3)
(M 10-3-3)
(M 10-4)