SGMW Baojun 530 Service & Maintenance And Owner’S Manual Download Page 97

Page: 97 / 215

Lighting

hti
ng

Inside Lighting

Front Reading Lamp

Type-I

The lamp has 3 working positions.

: The lamp illuminates and keeps illuminated until it is

manually turned off.

: The lamp gradually illuminates as any door is opened; it

works for a while and then gradually goes out after all the
doors (including liftgate) are closed.

: The lamp does not illuminate even a door is opened.

Type-II

ON: The lamp illuminates and keeps illuminated until it is
manually turned off.

(Intermediate position): The lamp illuminates as the door

(including the liftgate) is opened; it gradually goes out after
all the doors are closed.
OFF: The lamp does not illuminate even a door is opened.

Type-III

: Press the button to turn on the left/right reading

lamp and press it again to turn the lamp off.

: The reading lamp gradually illuminates if any door is

opened (including liftgate) as the button is pressed. It
gradually goes out after all the doors are closed.

Warning

Please avoid usage of the inside lamps during driving
in darkness. A bright passenger compartment can
reduce the visibility outside and cause collision as a
result.

Summary of Contents for Baojun 530
























































































































































































































Search results

Summary of Contents for Baojun 530

Reviews:

Related manuals for Baojun 530

Brands by name

Popular brands

SGMW Baojun 530, Service & Maintenance And Owner’S Manual

Search results

Summary of Contents for Baojun 530

Reviews:

Related manuals for Baojun 530

Brands by name

Popular brands