SGMW Baojun 530, Service & Maintenance And Owner’S Manual

Page: 120 / 215

112 Driving and Controls
Mechanical Ignition Switch Position*
When the ignition switch is turned at the right side of the
steering column, the operating positions are as follows:
LOCK, ACC, ON and START.
●
LOCK
Lock the steering wheel. Remove the key and turn the
steering wheel till the steering wheel is locked.
If you cannot turn the key when unlocking the steering
wheel, you can gently turn the steering wheel to right/left for
one thing and turn the key for another.
●
ACC
The engine can be shut down when the ignition key is turned
to the ACC position without the need to lock the steering
wheel. If you are to turn the ignition key from the ACC
position to the LOCK position, you can gently press in the
key and turn the key to the LOCK position.
When the ignition key is at the ACC position, some electrical
accessories such as radio and cigar lighter can be used.
●
ON
Connect the ignition system and electrical accessories.
Note
Do not keep the key at the ACC position and the ON
position for a long time when the engine is out of
operation; otherwise the battery will be in insufficient
voltage.
●
START
Start the engine. After starting the engine, release the key;
the key will automatically return to the ON position.
Confirm that the engine does not operate before turning the
ignition key to the START position.
Caution
Never remove the key or turn the key switch when the
vehicle is running.
Otherwise, the brake assistance will disappear and the
steering wheel may be locked. Therefore, the driver
will lose control of the vehicle and thus the vehicle
damage and the casualty accident may be caused.
ENGINE START STOP Switch Position*
If equipped, the ENGINE START STOP switch is at the
lower right side of the instrument cluster.
Working indicator on ENGINE START STOP switch:
Orange: It indicates that the ignition switch is at the ACC or
ON position.
Green: It indicates that the start conditions are met.
When the working indicator turns green, if the transmission
is at the neutral position, press the start switch and then the
engine can be started.
When the power is switched from the low voltage to the high
voltage, the system must be able to detect the legal key.
Please place the key at one position near the ENGINE
START STOP switch inside the vehicle, such as driver’s
pocket or instrument panel storage box.