SGMW Baojun 530, Service & Maintenance And Owner’S Manual

Page: 144 / 215

136 Vehicle Service & Maintenance
Drive Belt
For normal operation of engine and air compressor, the
drive belt should be adjusted to a good state. In case of
damage, break or wear, please replace the drive belt.
Caution
If the key is not pulled out, the engine may be start
unintentionally during check. Do not leave the key in
the ignition switch when checking the drive belt.
Sudden running parts may cause serious personal
injury when the engine is in operation.
Brake Pedal
Brake Pedal Travel Check
Brake pedal travel:
To avoid affecting the pedal travel, do not lay a thick carpet
in the brake pedal area.
The reasonable range of brake pedal free travel is 0~30
mm.
If the brake pedal fails to return or the brake pedal travel
becomes longer, please go to the Aftersales Service Center
for inspection. This may indicate faults of the brake system.
Fuse
Fuse replacement:
1.
Open the fuse box cover.
2. Identify damaged fuses by finding out blown fuses.
3. Use a fuse extractor to remove the blown fuses. The
fuse extractor is in the engine compartment fuse box.
4. Figure out the cause of fusing and remove the fault.
5. Install new fuses with rated current meeting the
requirements.