SGMW Baojun 530, Service & Maintenance And Owner’S Manual

Page: 94 / 215

86 Lighting
Outside Lighting
Lighting Switches
To switch on or off the headlamp, tail lamp and parking
lamp, please turn the end of the combination switch control
lever.
The lighting switch has 3 positions and they represent
different lighting functions:
OFF= All the lamps are turned off.
= The position lamp, license plate lamp, instrument panel
lamp and backlight of all the panels illuminate.
= The low beam lamp and all lamps mentioned above
illuminate under the precondition that the ignition switch is
turned to ON position.
High Beam
To turn on headlamp high beam:

Ensure that the ignition switch is in ON position;

The headlamp is in a low beam state;

As is shown in the figure, push the combination switch
control lever towards the instrument panel.
The headlamp high beam indicator illuminates when the
headlamp high beam is turned on. To switch from headlamp
high beam to low beam, pull the control lever towards the
opposite direction until it returns to the normal position.
Warning
When approaching the on-coming vehicle or the
vehicle ahead, please do switch the high beam to low
beam. This is because headlamp high beam can make
other drivers feel temporarily blind and cause collision
as a result.
Headlamp Flashing
To activate headlamp high beam flashing, please pull the
combination switch control lever toward yourself and then
release it. The control lever will return to the normal position
as you release it.
Before you release the control lever, the headlamp high
beam keeps illuminated.
Hazard Flasher
Press to turn on/off the hazard flasher.