19
Attaching the Top Hat
1.
Align the Top Hat correctly to the front lens.
2.
Allow the powerful magnets (2 on each side) to snap
into place.
To detach the Top Hat, simply remove it in a straight upwards
line with a firm grip. Ensure there are no metal dust or any
other particles where the magnets are located.
Attaching the Top Hat safety wire
The Top Hat includes a safety wire that can be mounted to the front hood of the fixture, and thus ensuring the Top Hat never gets lost.
To mount the safety wire to the fixture:
1.
Loosen one of the four screws of the G-4 Series front hood.
2.
Place the safety wire securing plate in the chosen screw hole with the clipping point outwards (B). Make sure it is well
aligned.
3. Insert the screw through the safety wire securing plate and the screw hole, and tighten firmly.
4.
Fasten the snap hook in the safety wire clipping point - if not already attached (A).
A
B
A: Magnetic area
B: Fastening area
A
B
A: Snap hook
B: Safety wire securing plate
A
B
A: Snap hook
B: Safety wire securing plate
A
B
A: Magnetic area
B: Fastening area
Figure 16: Attaching the Top Hat
Figure 17: Attaching the Top Hat safety wire
A
C
C
B
A: Top Hat (front view)
B: Safety wire
C: Magnets (back view)
G-4 Wash Top Hat
The G-4 Wash is extendible using the Top Hat, which main function is to create discrete lighting designs, reducing flare coming from
the direct light source.
The Top Hat can be easily mounted through magnetic fastening. When correctly aligned to the front lens, the Top Hat will snap into
place due to the four powerful magnets.
Figure 15: Top Hat overview