13
G-4 RGBAM
The Full Color Calibration (FCC) and Color Temperature Correction (CTC) enables the fixture to mimic different color temperatures.
When enabling the CTC channel 11, the DMX values are:
•
0 = Default 5,600K
•
1 - 4
= No CTC Raw White
•
5 - 255 = Seamless variation 2,000K to 10,000k. Refer to the DMX Chart for specifications
The CTC channel sets the white reference, of which any color will mix towards.
Example:
1.
CTC is set to DMX value 182 / 71,3% = 5,600K white (default value)
2.
Green + Blue at 100% = Full cyan
3. Red is added/faded to 100% = Cyan will fade to 5,600K white
Note: when using CTC color modes in the G-4 RGBAM, the Amber and Mint LEDs are added to the RGB color mix
automatically, thereby creating a high color rendering in the different color temperatures. This is created by SGM algorithm.
G-4 W
The G-4 W has a CTC function that inserts at CTO filter (color temperature orange) which will modify the White 7,200K LED to
5,000K. This filter can be changed to a different type upon request when ordering the fixture.
When enabling the CTC channel 10, the DMX values are:
•
0
= Default 7,200K
•
255
= 5,000K (Standard CTO filter inserted)
Full Color Calibration and Color Temperature Correction
Pan / Tilt positions
To edit and store any of the 7 internal pan/tilt position presets:
1.
Press ‘ESC’ to disable pan/tilt.
2.
Navigate to MENU → MANUAL → STORE POSITION.
T
he fixture will turn on the light automatically.
3. Navigate to the position preset required.
4.
Manually point the head in the direction desired for the chosen
position preset.
5.
Store/overwrite the position preset by pressing ‘ENTER’.
The fixture will confirm when briefly snapping to green and back to
white light.
6.
Repeat step 3-5 for other position presets
The internal pan/tilt position presets can be recalled and stored by DMX through the pan mode channel. These position presets are
also used as position references for the internal programs.
Press ‘ENTER’ to confirm position
Proceed to the next position.
Adjust position manually.
Press ‘ENTER’ to start.
Figure 10: Editing pan / tilt positions
Internal programs
The G-4 Series features a selection of internal programs which can be used standalone without a controller.
There are seven internal programs ranging from simple continuous pan rotation and pan/tilt circles to sequential fade, with nine
programmable position presets. The table below shows the available programs.
Programming the position presets for the internal programs is performed by using the innovative SGM patented system, which lets
you determine the pan position by changing it directly by hand. These position presets can also be captured directly from DMX values
sent from a controller.
Program 1,2,4,5, and 7 will use the pan/ tilt values programmed in position preset 1 of the internal position.
Program
Color
Movement
Position preset reference
1
White
Small circle slow
Stored position preset 1
2
White
Large circle slow
Stored position preset 1
3
White
Pan continuous and tilt swing
N/A
4
White
Large circle slow
Stored position preset 1
5
White
Pan continuous
Stored position preset 1 (for tilt only)
6
White
Sequential stored position preset fade
All
7
White
Static stored position preset 1
Stored position preset 1
