Digital Weighing Indicator
SI 4100
G
TG]GT
3-4. Option Card
Option No.1
Printer Interface : Centronics Parallel
Option No.2
Analog Output (0~10V or 0~5V)
Option No.3
Analog Output (4~20mA)
Option No.4
Serial Interface : RS-232C / 422 / 485
Option No.5
BCD INPUT (P/N change purpose)
Option No.6
BCD Output
ଖ
Serial Interface (RS-232C) or Current Loop is Standard installed.
In the Optional Serial port, there is no Current Loop function.
3-5. Front Panel (Display / Key Pad)
3-5-1. Status Lamp (ANNUNCIATORS) : “▼” Lamp is “ON”.
Steady
When the weight is Steady, “▼” Lamp is turn on.
Zero
When the current weight is Zero, “▼” Lamp is turn on.
(Displayed weight is Zero, “▼” Lamp is turn on.)
Tare
Tare function is set, “▼” Lamp is turn on.
(Tare Reset
“▼” Lamp is turn off.)
Run
Weighing Batch is started, “▼” Lamp is turn on.
(Under F21-01, 05, 06 setting)
Hold
Hold function is sec, “▼” Lamp is turn on.
(Hold Reset
“▼” Lamp is turn on.)
When print key input, “▼” Lamp is turn on.
(Under F38-00 setting, option port : F68-00)
Comm.
When indicator transfers or receives data from other devices, “▼” Lamp is turn on.
If the “▼” is off although there is some data transference, please check communication setting.
Set point Relay
Weight Display
G
Weight Unit
Calibration Lock-Key
G
F-Function Key
Create PDF
files without this message by purchasing novaPDF printer (
http://www.novapdf.com
)
