- 30 -
5-6. F-Function Detailed information
■
General Function Setting
(
●
Factory default set value)
Weighing Data Save Method Selection
(Apply on Accumulated weighing count/weight)
●
0
Manual Save Mode (Save when “Print” key input)
1
Automatic Save Mode(Save when weighing is Finished)
F01
2
Combined Save Mode
(Save when “Print” key input or weighing is Finished)
1. F01-00, F38-00 setting (Manual Save mode + Manual Print mode)
Finished Weighing data will be saved when
key input. And Print will be output simultaneously.
So, the
saved data and printed data is same.
If the
key is not input, there is no data saved and printed.
2. F01-00, F38-01 setting (Manual Save mode + Auto Print(When Finish relay output)mode)
When
“
Finish Relay
”
output, Print will be done automatically., But Finished weighing data will not be
saved automatically. If you want to save
“
Finished data
”
, you have to press
key separately.
※
Caution
Under this setting, there will be some difference between “Saved Data” and “Printed Data”.
3. F01-01, F38-00 setting (Automatic Save(When Finish relay output) + Manual Print mode)
When
“
Finish relay
”
output, the finished data will be saved automatically, but this data will not be
printed out. If you want to print out
“
Finished data
”
, you have to press
key separately.
※
Caution
Under this setting, there will be some difference between “Saved Data” and “Printed Data”.
4. F01-01, F38-01 setting (Automatic Save(When Finish relay output) + Automatic print(When
Finish relay output) mode
When
“
Finish relay
”
output, finished data will be saved and printed automatically.
Under F21-01/03/04/07 mode(without Finish relay mode), indicator will apply same time period to
make finished data save.(After reaching to
“
Final
”
and will apply F22-XX time period)
