- 80 -
6-8-2. Write Command
※
Each “WRITE” Command’s interval must be guaranteed at least 150ms. If you command
another one within 150ms, the indicator will not response. (Under “Check-Sum”, the
interval will be 200ms).
P.C ->> SI 4200
Command
SI 4200 Response
STX ID NO. WZER ETX
To make Current Weight as Zero
ACK or NAK
STX ID NO. WTAR ETX
TARE
ACK or NAK
STX ID NO. WTRS ETX
TARE Reset
ACK or NAK
STX ID NO. WPRT ETX
ACK or NAK
STX ID NO. WSPR ETX
SUB-Total Print
ACK or NAK
STX ID NO. WGPR ETX
GRAND Total Print
ACK or NAK
STX ID NO. WSTC ETX
Delete SUB-Total Data
ACK or NAK
STX ID NO. WGTC ETX
Delete GRAND-Total Data
ACK or NAK
STX ID NO. WSTR ETX
RUN
ACK or NAK
STX ID NO. WSTP ETX
STOP
ACK or NAK
STX ID NO. WTIM
Time Data(6byte)
ETX
TIME Setting
ACK or NAK
STX ID NO. WDAT
Date Data(6byte)
ETX
DATE Setting
ACK or NAK
STX ID NO. WPR1
PRE1 Data(7/8byte)
ETX
PRE 1 Setting
ACK or NAK
STX ID NO. WPR2
PRE2 Data(7/8byte)
ETX
PRE 2 Setting
ACK or NAK
STX ID NO. WFIL
FINAL Data(7/8byte)
ETX
FINAL Setting
ACK or NAK
STX ID NO. WFRE
Free Fall Data(5byte)
ETX
FREE FALL Setting
ACK or NAK
STX ID NO. WLOW
Low Data(7/8byte)
ETX
LOW Setting
ACK or NAK
STX ID NO. WHIG
High Data(7/8byte)
ETX
HIGH Setting
ACK or NAK
STX ID NO. WPNO
P/N Data(2byte)
ETX
P/N Change
ACK or NAK
STX ID NO. WFTD
All Setting Data
ETX
PRE1, PRE2, FREE FALL, FINAL
Setting
ACK or NAK
