manualshive.com logo in svg

SEW-Eurodrive MOVIPRO ADC, Operating Instructions Manual

Share
Download
SEW-Eurodrive MOVIPRO ADC Operating Instructions Manual Download Page 176

9

Operation

Status and error messages

Operating Instructions – MOVIPRO

®

 ADC

176

Status LEDs FO1 and FO2 Ethernet connection push-pull SCRJ

The  two  LEDs  "FO1"  and  "FO2"  indicate  the  signal  quality  of  the  respective  optical
transmission line.

The LEDs are on the left and the right of both Ethernet fieldbus ports push-pull SCRJ:

[1]

[2]

4083348491

[1]

FO1

[2]

FO2

Status LED

Possible cause

Measure

Off

The signal level is 2 dB or more.
The signal quality is good.

–

Lights up red The optical signal level has fallen

below 2 dB.

This can have the following reas-
ons:

•

Aging effect of the polymer
fiber

•

The plug connector is not
properly connected.

•

The externally connected
cable is faulty or damaged.

•

Check whether the plug con-
nector is inserted correctly.

•

Check the damping of the ex-
ternally connected cable.

22749055/EN – 04/2016

Summary of Contents for MOVIPRO ADC





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands