manualshive.com logo in svg

SEW-Eurodrive DHE21B, Manual, Page: 30 / 80

Share
Download
SEW-Eurodrive DHE21B Manual Download Page 30

30

Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)

4

Installing the DH.21B/41B option

Assembly and Installation Notes

4.7.9

SD memory card types OMH41B-T. and OMC41B-T.

The SD memory card is required for operating the DH.21B/41B option. It stores the
firmware, the IEC program and user data (e.g. recipes). You can use the memory card
for data backup and automatic parameterization in the event of an axis replacement.

The SD memory card is available in 26 variants (T0 – T25). The different variants let you
execute different technology functions. The technology level can be changed by
changing the SD memory card.

OMH41B-T. type

With the SD memory card type OMH41B-T., the DH.21B/41B option is used as freely
programmable controller. The SD memory card OMH41B-T. is inserted in the DH.21B/
41B option. If the delivery also includes a compact controller, a MOVIAXIS

®

 master

module or an inverter with installed DH.21B/41B option, then the SD memory card is
already installed in the DH.21B/41B option.

SD memory card OMH41B-T.

Technology 
levels 
T0 – T25

Part number

Description

T0

1821 204 2

•

Speed control management

•

Positioning, e.g. with the MPLCMotion_MDX library

T1

1821 205 0

Additional technology functions for T0:
•

Electronic cam

•

Electronic gear unit

•

Cam controller

T2

1821 206 9

A certain number of technology points is consumed depending on the 
functionality used.
Refer to the relevant documentation for information on how many 
technology points are required.

T3

1821 967 5

T4

1821 968 3

T5

1821 969 1

T6

1821 970 5

T7

1821 971 3

T8

1821 972 1

T9

1821 974 8

T10

1821 975 6

T11

1822 860 7

T12

1822 861 6

T13

1822 862 3

T14

1822 863 1

T15

1822 865 8

T16

1822 866 6

T17

1822 867 4

T18

1822 868 2

T19

1822 869 0

T20

1822 870 4

T21

1822 871 2

T22

1822 872 0

T23

1822 873 9

T24

1822 874 7

T25

1822 875 5

 

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for DHE21B

















































































Reviews:

No comments