Servomex SERVOTOUGH Oxy, Operator'S Manual

Page: 40 / 145

28
© Servomex Group Limited. 2020 01910001B_8
Note the following when you install a sample condi�oning system:
• Locate the sample condi�oning system below the analyser, to prevent the carry
-
over of
condensate into the analyser sample measurement transducer.
• Ensure that the sample condi�oning system will not impact on the environmental limits
of the analyser (see Sec�on
2.2
).
To mount the
analyser on a rigid ver�cal surface, atach the fixing lugs on the analyser to suitable bolts
or hooks to securely mount the analyser: refer to Figure
12 and
Figure
13
for the fixing dimensions.
Fixing lugs are suitable for M8 studs or bolts (Grade 8.8 or above) with a standard washer
.
Li�ing Instruc�ons:
Analyser should not be li�ed by one person alone. Where possible it is suggested to
li� the analyser with suitable li�ing apparatus such as a hoist. PPE (Personal
Protec�ve Equipment) such as safety shoes should be used to protect any persons
from injury.