Servomex SERVOTOUGH Oxy, Operator'S Manual

Page: 119 / 145

01910001B_8 © Servomex Group Limited. 2020
107
Registe
r
Name Comments
1126
Volt reset A �me out occurred on the volt card.
1127
Pressure calibra�on Pressure needs calibra�ng.
1128
Pressure fail
Hardw
are fault detected.
1129
Pressure low Pressure low fault.
1130
Pressure high Pressure high fault.
1131
Relay not detected Card missing or incorrect type has been fited.
1132
Switch input not detected Card missing or incorrect type h
as been
fited.
1133
Flow fail Hardware fault detected.
1134 Low flow alarm 1 Flow has fallen below flow alarm level 1
1135
Low flow alarm 2 Flow has fallen below flow alarm level 2
1136
Remote service in progress Switch input has ac�vated service in progress.
1137 T
ransducer calibra�on mode Calibra�on mode is ac�ve.
1138 Auto
valida�on/calibra�on. Sequence is in progress
1139
Milliamp service in progress Calibra�on or override in progress.
1140 Volt service in progress Calibra�on or override in progress.
1
141 Pressure service in progress Calibra�on in progress.
1142 Relay service in progress Override in progress.
1143 Flow service in progress Calibra�on in progress.
1145 High Flow Alarm Flow has risen above the high flow alarm level
1146 Flow temperature fault Flow hardware has a temperature fault
1147 Flow cal high diff Zero and normal flow calibra�on points are too far apart
1148 Flow cal low diff
Zero and normal flow calibra�on points are too close
together