Servomex SERVOTOUGH Oxy, Operator'S Manual

Page: 38 / 145

26
© Servomex Group Limited. 2020 01910001B_8
Note:
You may be asked to provide the information from this screen to the Ser
vomex
support team; for example, as an aid to fault diagnosis.
4.10
Editing on
-
screen data
A common method is used for edi�ng data shown on all of the different screens.
When you
press the
so� key to edit an item of data, the screen changes to show the
corresponding edit screen, with the first digit highlighted:
Figure
11 -
A typical edit screen
When
the first digit is highlighted, press the so� key to exit the menu without changing the data.
Alterna�vely, use the so� keys t
o edit the data as
follows:
Soft key Function
Increases the highlighted digit by
1
Decreases the highlighted digit by 1
Moves the cursor le� to the previous digit
Moves the cursor right to the next digit
Note that the figures above and below the highlighted digit shows the digits above and below the
currently highlighted value.
When the last digit is highlighted,
press the
so� key to enter the new data.
Note:
When editing numerical values, the decimal point appears between digits "9" and "0".