-48 VDC Remote Power Manager
Advanced Operations
113
Installation and Operations Manual
Setting the SNMP v3 read-write (RW) authentication type:
The Set SNMP RW Auth Type command sets the SNMP v3 RW authentication type.
To set the RW authentication type:
At the Switched -48 VDC: prompt, type
set snmp v3
rwauthtype
, followed by
none
or
md5
, and press
Enter
.
Setting the SNMP v3 read-write (RW) authentication password:
The Set SNMP RW Auth Password command sets the SNMP v3 RW authentication password. A valid authentication
password can be set to any value between 1-39 characters. A blank password will clear the string
To set the RW authentication password:
At the Switched -48 VDC: prompt, type
set snmp v3
rwauthpass
, and press
Enter
.
Setting the SNMP v3 read-write (RW) privacy type:
The Set SNMP RW Priv Type command sets the SNMP v3 RW privacy type.
To set the RW privacy type:
At the Switched -48 VDC: prompt, type
set snmp v3
rwprivtype
, followed by
none
or
des
, and press
Enter
.
Setting the SNMP v3 read-write (RW) privacy password:
The Set SNMP RW Priv Password command sets the SNMP v3 RW privacy password. A valid privacy password can
be set to any value between 1-32 characters. A blank password will clear the string
To set the RW privacy password:
At the Switched -48 VDC: prompt, type
set snmp v3
rwprivpass
, and press
Enter
.
Setting the SNMP v3 trap username:
The Set SNMP Trap Username command sets an optional username for display on SNMP activity logs to identify user
actions.
At the Switched -48 VDC: prompt, type
set snmp v3 trapusername
, and press
Enter
. The trap username can be 1-31
alphanumeric characters; spaces are allowed; and the name is case sensitive.
Setting the error trap repeat timer:
The Set SNMP Traptime command sets the timer period between repeated error condition traps.
The valid range is 1 to 65535 (in seconds). The default is 60 seconds.
To set the error trap repeat timer:
At the Switched -48 VDC: prompt, type
set snmp traptime
, followed by the timer period, and press
Enter
.
Example
The following sets the timer period to 180 seconds:
Switched -48 VDC: set snmp traptime 180<Enter>
Setting the SNMP trap format version:
The SNMP Trap Format configures the SNMP trap format version. The trap format can be SNMP v1, v2, or v3.
To set the trap format version:
At the Switched -48 VDC: prompt, type
set snmp trapformat
, followed by
1
,
2
, or
3
, and press
Enter
. The default is
v1, regardless of the versions that are enabled for the agent.
Example
The following sets the trap format version to SNMP v3:
Switched -48 VDC: set snmp trapformat 3<Enter>
