oculus device seTup
40
40
Guardian Setup.
Once the floor height has been established,
you can skip the rest of the setup procedure. Click
Skip
,
using the left controller, and it will prompt you with an
acknowledgement. Agree, and the OIculus program will
return you to the home screen.
9
Note:
You will need one touch controller for this
process. You will reach a stage of the setup, in the
headset, where you will be placed in a grey environment
with three floating orbs. At this step, remove headset
and exit the basket. This is a tutorial, and once you have
reached this stage, the Device Setup is complete and
you may begin using the MEWP VR simulator.
Place the left-hand Oculus Touch Controller firmly into the
mounting bracket located to the left of the AWP controller,
opposite of the Scissor lift controls, as shown below. Leave
the right-hand Oculus Touch Controller in the travel case - it
is only required for Oculus calibration.
B
1
launChing Mewp vr
41
41
Launching MEWP VR