Sensors & Software CONQUEST 100, User Manual

Page: 107 / 143

Conquest 100 Capturing Screens and Emailing Mini Reports
97
10 Capturing Screens and Emailing Mini Reports
10.1 Capturing Screens
If you would like to save an image of the current screen, press the camera button on the
Display Unit.
If you are not connected to a Wi-Fi network, a message appears confirming the name of the file
the image was saved to (Figure 10-1).
Figure 10-1: Message after pressing the camera button on the Display Unit to capture the screen (no Wi-Fi).
If you are connected to a wireless network and have an e-mail address configured, the user will
see the message in Figure 10-2, asking if you would like to e-mail the data and prompts you to
enter the e-mail address. This may take a few seconds to display the message. The e-mail
address defaults to the last one entered. Tapping on the address box brings up an on-screen
keyboard and allows you to enter a new e-
mail address. Pressing the “ … ” button to the left of
the e-mail address displays the last 5 e-mail addresses used, allowing the user to easily select a
recent e-mail address, rather than re-entering it.
Screenshots can always be e-mailed at a later time from the Screenshot Gallery ( Section 5.3.2).