Sensors & Software CONQUEST 100, User Manual

Page: 29 / 143

Conquest 100 Assembling Conquest
19
Figure 3-4: Sensor cable connection to the Sensor Head
Insert Battery into Display Unit
Conquest 100 uses a Lithium-Ion battery
with an external “Battery Level” button to indicate the
current level of battery charge.
Note: When using the battery for the first time, be aware that the battery is shipped from
the factory at about 50% capacity
in a “transport” state for increased safety. The battery
and battery level button will not work until the battery has been initialized by either:
a) Inserting the battery into the Display Unit and then plugging the Battery Charger/AC
Adapter into an AC source and connecting it to the Display Unit, or
b) Connecting the battery to the optional desktop charger.
The battery can be used immediately after initializing it but with a capacity of 50%, it won’t last
as long. It is best to fully charge the battery before use.