Io
SENSOR
Section 2 SMT-200 Operations
SMT-200 Operations and Technical Manual 2.00/R1
33
2.30.
4.6
Read Config
Loads the stored configuration file
The configuration file holds all the parameters that setup the SMT-200. The
file is automatically loaded and saved on power up and shutdown. Read
config will reload the parameters that the unit powered up with or the
parameters that were saved on the last Save Config command.
2.31.
4.7
Save
Config
Saves the configuration file
Writes (saves) the current configuration to file in the non-volatile memory
(flash disk).
File menu
----------------
1 Redisplay last
2 Storage status
3 Dump data file
4 List data file
5 Erase ALL data
6>Read Config
7 Save Config
0 Back to Main
----------------
Read Config.
from file
4>File menu...
File menu
----------------
1 Redisplay last
2 Storage status
3 Dump data file
4 List data file
5 Erase ALL data
6 Read Config
7>Save Config
0 Back to Main
----------------
Save Config.
to file
4>File menu...
