Sensor SMT-200 Operation And Technical Manual Download

Page: 50 / 152

Section 3 Docking Station & PC Software Operations

SENSOR

SMT-200 Operations and Technical Manual 2.00/R1

5. You will be asked if you want create a Program Manager Group. It’s strongly recommended to

have a Program Manager group. This will make it easier to start and un-install the program at a
later date if required.

3.5.1 Windows un-install

If the software needs to be removed from the hard disk use the following procedure.

1. Select the Un-Install from Windows SMT200 menu option.

This will remove all the SMT-200 Docking Station software components apart form the DATA directory
and file transfer history files.

3.6 DOS

installation

1. Insert the Disk into drive A:
2. Type

A: Return

3. Type

INSTALL Return

4. Follow the instructions on the screen. The prompts will be similar to the windows installation.

3.6.1 DOS

un-install

The program files need to be removed manually using the DOS comands Del and RMdir. Please
consult your DOS manual for further details. Note SMT-200 data is stored in a separate directory.

Summary of Contents for SMT-200

























































































































































Search results

Summary of Contents for SMT-200

Reviews:

Related manuals for SMT-200

Brands by name

Popular brands

Sensor SMT-200, Operation And Technical Manual

Search results

Summary of Contents for SMT-200

Reviews:

Related manuals for SMT-200

Brands by name

Popular brands