Io
SENSOR
Section 1 Introduction
SMT-200 Operations and Technical Manual 2.00/R1
3
1.1 Introduction
These instructions are intended as a guideline for the operation of the SMT-200 Geophone Tester. Should
problems be found that cannot be answered by these notes please call your nearest I/O Sensor Technical
Support location for assistance.
The availability of future software upgrades will be made known to SMT-200 users via the i-o web site.
Your comments regarding the convenience of operation of the unit, its performance, any problems you have
experienced and any features that would be useful or are in your opinion essential, would be greatly
appreciated for the future development of this product.
The software provided with this tester is proprietary and may not be copied without prior consent having
been obtained from Sensor Nederland b.v.
1.2 Technical
Support
Further information and assistance can be obtained by calling one of the following I/O SENSOR Technical
Support locations:
EUROPE
Sensor Nederland bv.
Rouwkooplaan 8
2251 AP Voorschoten
Holland
Tel.
+31 (0)71 5601234
Fax.
+31 (0)71 5617145
Contact and e-mail address:
Steve Burden ([email protected])
Kees Faber ([email protected])
USA & CANADA
Input/Output
11104 West Airport
Stafford
Texas 77477 USA
Tel. +1 281 879 2130
Fax. +1 281 879 3500
Contact and e-mail address
Scott Williams ([email protected])
Pete Maxwell ([email protected])
See our web site at
www.i-o.com
for SMT-200 updates, geophone specifications and information on other
I/O products.
