SENSORPROX 100R/PIN120 -
SINGLE DOOR CONTROLLER
3
1. IMPORTANT SAFETY INSTRUCTIONS
When using your Single Door Controller, basic safety precautions should always be followed to reduce the risk of fire, electrical
shock, and injury to persons. In addition, the following should also be followed:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. If necessary, use mild soap.
4. Do not use this product near water, such as bath-tub, wash bowl, kitchen sink, laundry tub, in a wet basement, or swimming pool.
5. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied to your installation site, consult your dealer or local power company.
6. Never push objects of any kind into this product or through the cabinet slots as they may touch voltage points or short out parts
that could result in fire or electric shock. Never spill liquid of any kind on the product.
7. To reduce the risk of electric shock, do not disassemble this product by yourself, but take it to qualified service whenever service
or repair is required. Opening or removing the covers may expose you to dangerous voltages or other risks. Also, incorrect
reassembly can cause electric shock when the unit is subsequently used.
8. Unplug this product from the Direct Current (DC) power source and refer to qualified service personnel under these conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled on the product.
c. If the product does not operate normally after following the operating instructions in this manual.
Adjust only those controls that are covered by the operating instructions in this manual. Improper adjustment of other controls
that are not covered by this manual may damage the unit and will often require extensive work by a qualified technician to
restore normal operation.
d. If the product exhibits a distinct change in performance.
2. GENERAL
A properly configured SENSORPROX 100R/PIN120 is an intelligent single door controller that combines the convenience of wireless
entry with the security of an alarm system. Also, the SENSORPROX 100R/PIN120 system will give you field proven reliability and
cost-effective solution anywhere access controls and high security are required. Each standard unit can store up to 512 users or card
Ids. The task of assigning cards and managing a user’s database is so simple, user friendly, and can be accomplished in many
ways; it could be as simple as presenting each card to the unit or as descriptive as a user’s database with an easy to use Graphical
User Interface.
The SENSORPROX 100R/PIN120 can interface and operate with these accessories: Request for EXIT button, Door-Contact sensor, PIR
sensor, Fire sensor and other sensors via 5 independent input ports. Also, output ports which include 2 Relays and 2 TTL outputs can
be used to control the operation of other accessories such as Electric/Magnetic Door Lock, Alarm, Chime Bell, and Auto-Dialer.
Moreover, the status or behaviors of these input and output accessories are configurable to provide the system administrator with
complete customized control of the system. Besides the above configurable I/O interfaced behaviors, many of the SENSORPROX
100R/PIN120 internal behaviors are programmable as well.
The internal operating parameters include the number of incorrect access attempts before alarm condition is triggered, tampering
protection from mounting removal, and timers. Furthermore, every event or transaction can be captured and time stamped by the
SENSORPROX 100R/PIN120 application software via the provided RS-232 wires.
