SENSORPROX 100R/PIN120 -
SINGLE DOOR CONTROLLER
6
7. INSTALLATION OF THE PRODUCT
7-1
.
Tear off page 27 and use the provided template to drill two 6-32 holes and one 1/2" hole on the
proper location of the wall to mount the Wall Mount bracket as shown below.
(If the gang box is already installed on the wall then skip this step.)
7-2.
Using 2 screws, install wall mount to the wall.
* CAUTIONS *
Before mounting the SENSORPROX 100R/PIN120 unit to the Wall Mount bracket, operational testing
of the unit should be completed, as the locking pins will lock the unit to the Wall Mount. Removing the
unit from the Wall Mount bracket after they have been installed together may cause damages to the
bracket and render its effectiveness.
7-3
.
Insert 5 O-rings to the wall mount as indicated, then route the cable of the main unit through the center
hole and push the main unit to wall mount to lock the main unit and make sure that the main unit is locked
with wall mount.
