Sennheiser SpeechLine Page 190 Manual Download

Page: 190 / 214

The CHG 4N charger

189

Controlling and monitoring the CHG 4N char

ger over the network

You can connect the CHG 4N charger to a network using a

router or switch, which allows you to monitor and control the

accupack’s charge level using the

Sennheiser Control Cock

pit

software and to modify the CHG 4N charger’s network con

figuration.
For more information on controlling a system in the network

using the

Sennheiser Control Cockpit

software, refer to the

instruction manual of the software.
Please note that the host PC on which the

Sennheiser Control

Cockpit Service

is installed must be in the same network as

the devices that are to be monitored and controlled.

Connecting the CHG 4N charger to the network

To connect the charger using the Sennheiser Control Cockpit

app:

▷

Connect a standard network cable (at least Cat 5) to the

Ethernet socket of the charger.

▷

Connect the other end of the network cable to the network,

e.g. to a switch or router, or directly to a PC to make initial

configuration easier.

The yellow LED next to the CHG 4N charger’s Ethernet socket

indicates the connection status:

Yellow LED

•

-> The charger is connected to the network

•

Off

-> The charger is not connected to the network

►

Summary of Contents for SpeechLine























































































































































































































Search results

Summary of Contents for SpeechLine

Reviews:

Related manuals for SpeechLine

Brands by name

Popular brands

Sennheiser SpeechLine, Manual

Search results

Summary of Contents for SpeechLine

Reviews:

Related manuals for SpeechLine

Brands by name

Popular brands