Sennheiser SpeechLine Manual Download Page 161

Page: 161 / 214

Pairing

160

Pairing a receiver with a transmitter

To establish a new radio link between a receiver and a trans

mitter, proceed as follows:

The SL Rack Receiver DW

▷

Long-press the

PAIR

button of the receiver until its status

LED flashes alternately green and red.

▷

Press the

Pair

button of the desired device from the

device

list

in the

Control Cockpit

►

First,

Identify

appears on the display panel of the receiver.

The

Pairing

message then appears.

Any existing radio link is now disconnected.
You now have 90 seconds to establish a radio link with a

new transmitter.

▷

Long-press the

PAIR

button of the corresponding transmit

ter until its status LED flashes alternately green and red.
The

Press pair on receiver

message appears on the dis

play panel of the transmitter (SL Handheld DW and SL

Bodypack DW only).

Once the radio link is successfully established,

Paired

appears on the display panel of both the receiver and

the transmitter (only for SL Handheld DW and SL

Bodypack DW) and the status LEDs on the transmitter and the

receiver light up green.

Summary of Contents for SpeechLine























































































































































































































Search results

Summary of Contents for SpeechLine

Reviews:

Sennheiser SpeechLine, Manual, Page: 161 / 214

Search results

Summary of Contents for SpeechLine

Reviews: