Sennheiser SpeechLine Page 79 Manual Download

Page: 79 / 214

SL Rack Receiver DW

GA 4 mounting kit

You need the GA 4 mounting kit to install the receiver in a rack.

The GA 4 mounting kit is available separately as an accessory

and is also supplied with the following sets:
• SL Handheld-Set R
• SL Headmic-Set R
• SL Lavalier-Set R
The GA 4 mounting kit consists of:

►

Fastening the mounting angles (to install a receiver)

To fasten the mounting angles:

▷

Unscrew and remove the two recessed head screws on

each side of the receiver.

▷

Secure the mounting angles to the sides of the receiver us

ing the previously removed recessed head screws.
Make sure that the angled ends of the mounting angles

point forward.

Summary of Contents for SpeechLine























































































































































































































Search results

Summary of Contents for SpeechLine

Reviews:

Related manuals for SpeechLine

Brands by name

Popular brands

Sennheiser SpeechLine, Manual

Search results

Summary of Contents for SpeechLine

Reviews:

Related manuals for SpeechLine

Brands by name

Popular brands