Multi-room mode
57
Multi-Room Mode setup with both SL Rack Receiver
DW and SL Multi-Channel Receiver DW
When installing SpeechLine Digital Wireless in several rooms,
it is crucial that you perform the following steps one after the
other and room by room. When installing SpeechLine Digital
Wireless devices in one room, all devices in all other rooms
must be switched off.
▷
Install all SL Multi-Channel Receiver DW units of one room
to a wall or the ceiling with the front sides of the receivers
facing into the room.
Note: to ensure the Master/Follower functionality the re
-
ceivers should be installed side to side and not back to
back, as indicated in the following illustration.
►
▷
Install all SL Rack Receiver DW units in one rack and con
-
nect all cables (power, audio and LAN) (see „Installing re
ceivers in a rack“ and „Connecting the receiver“).
▷
Mount all antennas for the rack receivers as recommended
and feasible (see „Recommendations on antenna mount
ing“).
▷
Connect a LAN cable supplying PoE to the
Dante I / PoE /
Ctrl
RJ-45 socket of the first SL Multi-Channel Receiver
DW (see „Connecting the receiver“).
This receiver will become the Master.
▷
Pair all transmitters.
Room 2
Room 1
Summary of Contents for SpeechLine
