![background image](http://html.mh-extra.com/html/sennheiser/speechline/speechline_manual_1242308213.webp)
The SL PASC 4 passive antenna splitter/combiner
212
Fastening the mounting angles (to install an anten
-
na splitter)
To fasten the mounting angles:
▷
Remove the two recessed head screws on each side of the
antenna splitter.
▷
Fasten the mounting angles to the sides of the antenna
splitter by tightening the previously removed recessed
head screws.
Make sure that the angled ends of the mounting angles
point forward.
►
Installing the antenna splitter in a rack
To install the antenna splitter in a rack:
▷
Screw the front panel from the GA 4 mounting kit onto the
antenna splitter’s mounting angle using the two included
recessed head screws as shown in the figure.
Make sure to use the correct side (the one with the round
holes) of the blanking plate to secure it to the mounting an
-
gle.
►
▷
Insert the two small blanking plugs into the unused antenna
Summary of Contents for SpeechLine
