![background image](http://html.mh-extra.com/html/sennheiser/speechline/speechline_manual_1242308111.webp)
SL MCR DW
110
All LEDs are green
▷
After the power supply is switched on:
The device is starting (approx. 20 seconds). Afterwards the
status information is displayed.
All four LEDs light up green during startup even with the
two-channel variant SL MCR 2 DW.
▷
During operation:
A radio link to the transmitters has been established for all
channels.
All LEDs are flashing green
▷
The
Identify
function for the entire device was initiated in
the
Control Cockpit
.
All LEDs are yellow
▷
All received transmitters have been muted with the
MUTE
switch.
All LEDs are flashing yellow
▷
The device is performing a firmware update.
See „Updating the firmware“.
All LEDs are red
▷
There is no radio link to a transmitter for any of the chan
-
nels.
All LEDs are flashing red
▷
A device error has occurred. Details are shown in the
Con
-
trol Cockpit
.
or
▷
An error occurred while updating the device firmware. De
-
tails are shown in the
Control Cockpit
.
A channel's LED is green
▷
A radio link to the transmitter is established.
A channel's LED is flashing green
▷
The
Identify
function for this channel was initiated in the
Control Cockpit
.
The LED of the received transmitter also flashes.
Summary of Contents for SpeechLine
