Performing a walk test (reception quality)
165
The display of the radio signal level is continuously updat
-
ed.
▷
Click
Stop
to end the walk test.
If the result of the walk test is not satisfying, you can take the
following remedial measures:
• If possible, position the receiver so that there is always a di
-
rect line of sight between the receiver and the paired trans
-
mitter.
• If possible, remove obstacles between the transmitter and
the receiver.
• If necessary, adjust the manually selected transmission
power in the
Control Cockpit
under
RF power mode
on the
RF settings
tab. You can find more information under
Performing a walk test with the
SL Rack Receiver DW in the Control Cockpit
To perform a walk test in the
Control Cockpit
:
▷
Switch on the transmitter and the receiver of the radio link
you want to check.
▷
In addition, switch on all other devices that you want to use
in the operating environment.
▷
Select the device in the
Control Cockpit
.
▷
Open the
RF settings
tab.
►
▷
Click
Start
under
Walk Test
.
►
▷
Walk the operating environment with the transmitter.
The display of the radio signal level is continuously updat
-
Summary of Contents for SpeechLine
