Sennheiser SpeechLine Page 13 Manual Download

Page: 13 / 214

The Products of the SpeechLine Digital Wireless Series

The Products of the SpeechLine Digital

Wireless Series

For information about the available accessories, see „Acces

sories“.

The SL Rack Receiver DW receiver

►

The 9.5" rack receiver (SL Rack Receiver DW) is the core of the

SpeechLine Digital Wireless system. Thanks to the bi-direc

tional communication between the rack receiver and the

transmitter, all transmitter settings can be adjusted on the re

ceiver. The receiver's automatic frequency management elim

inates the need for manual frequency setting and the

automatic interference management guarantees maximum

transmission reliability. The user-friendly pairing function en

sures a reliable connection between transmitter and receiver.

Network integration enables the receiver to be remote con

trolled and monitored using a media control system (e.g. AMX,

Crestron) or the Sennheiser Control Cockpit software. The an

tennae can either be mounted to the rear of the receiver or to

the front of a rack. Antenna cables of different lengths also al

Summary of Contents for SpeechLine























































































































































































































Search results

Summary of Contents for SpeechLine

Reviews:

Related manuals for SpeechLine

Brands by name

Popular brands

Sennheiser SpeechLine, Manual

Search results

Summary of Contents for SpeechLine

Reviews:

Related manuals for SpeechLine

Brands by name

Popular brands