background image

The acoustic response of the N/D267a and 267as

presents optimal performance in a live sound

environment. The new “vocally optimized bass” or

VOB

Ô technology provides the performer with reduced

resonant distortion at low frequencies. Critical damping

of the low frequency resonant peak has resulted in a

microphone that replaces the “muddiness” found in

competitive models with greater warmth and increased

vocal clarity. The increased clarity permits greater

working distances than other competitive microphones,

and ensures a clean, clear, consistent sound that “cuts

through the mix.”

•

VOBÔ technology provides tailored bass response for

controlled “proximity effect” and exceptional vocal

clarity

•

Cardioid pattern for superior feedback rejection and

acoustic isolation

•

Consistent sound over greater working distances than

competitive models

•

Neodymium based magnet structure provides greater

sensitivity and signal-to-noise ratio.

•

Warm GripÔ handle for more comfortable feel.

•

On/Off switch on N/D267as

Operation

The low frequency response of the N/D267a and 267as

microphone varies with the distance from the sound

source. Known as “proximity effect,” maximum bass

response is produced in “close-up” use with the

microphone ¼ inch from the sound source. Normal bass

response is experienced with working distances greater

than 24 inches. Working close to the microphone will

produce a more robust sound. Close up positioning of the

microphone will also reduce the potential for feedback

from the sound reinforcement system. When close-talked,

the bass-boost provides an increase in overall microphone

output level. The mixer gain may be proportionately

reduced, resulting in a reduction of the system’s sensitivity

to feedback caused by sound entering the microphone

from the loudspeakers.

Microphone Use and Placement

Please note that micing techniques are a matter of personal

preference. These are merely guidelines to assist in the

placement of the microphone to gain optimal performance.

Usage

Optimal Placement

Vocals

Zero to six inches from the

windscreen, and on axis with

the microphone.

Spoken

Word

Five to ten inches from the

windscreen, and on axis with

microphone.

N/D267a and 267as User Manual

W I R E D
M I C R O P H O N E

Reviews: